  |
| All parts listed on this page will fit your E-Revo |
GEN3 Slipper Units
|
 
GEN3 Slipper Units will not fail under the enormous load conditions of todays brushless motor systems. The new GEN3 Slipper Unit is a captured
design to prevent slipper pad blowout and deliver maximum power to the ground. The hi-performance hardened steel spur gear will not fail or strip.
Strong and tough 0.8 module/32-pitch teeth handle all the power you can pour on the spur gear. Aircraft grade billet aluminum backplate will not
bend or break. Increased surface area of the oversized pad insures dependable performance. Less total parts reduces flex and wobble in the spur
gear and slipper unit. Bearing included. |
| Part # |
Description |
Price |
| 7960 |
Traxxas E-REVO Brushless GEN3 Slipper Unit - 0.8 module 60 Tooth Steel Spur Gear/Slipper Pad/Backplate/Bearing
|
$46.50 |
| 7965 |
Traxxas E-REVO Brushless GEN3 Slipper Unit - 0.8 module 65 Tooth Steel Spur Gear/Slipper Pad/Backplate/Bearing |
$46.50 |
|
.8 Mod Brushless Motor Pinions (Fits 5 m/m and 1/8 inch motor shaft)
|
Extra hard high carbon brushless motor pinions are built to last with our hi-performance GEN3 steel slipper units. All pinions precision machined and stamped with the number of teeth. One 4 m/m set screw included. 2 m/m allen wrench (not included) fits the 4 m/m set screw. Can be run on cars using a 5 m/m motor shaft including Traxxas, Associated, and HPI models.
RRP#1200 5 m/m to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors.
Note: 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly larger outside diameter per tooth, roughly .00027 of an inch.
|
| Part # |
Description |
Price |
| 8711 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 11 Teeth |
$12.50 |
| 8712 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 12 Teeth |
$12.50 |
| 8713 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 13 Teeth |
$12.50 |
| 8714 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 14 Teeth |
$12.50 |
| 8715 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 15 Teeth |
$12.50 |
| 8716 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 16 Teeth |
$12.50 |
| 8717 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 17 Teeth |
$12.50 |
| 8718 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 18 Teeth |
$12.50 |
| 8719 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 19 Teeth |
$12.50 |
| 8720 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 20 Teeth |
$12.50 |
| 8721 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 21 Teeth |
$12.50 |
| 8722 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 22 Teeth |
$12.50 |
| 8723 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 23 Teeth |
$12.50 |
| 8724 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 24 Teeth |
$12.50 |
| 8725 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 25 Teeth |
$12.50 |
| 1200 |
5m/m to 1/8 inch Reducer Sleeve. |
$3.95 |
| 1201 |
4x4 m/m set screws for 5 m/m pinions. 5 set screws. |
$2.50 |
| |
|