  |
|
1.5 Mod Brushless Motor Pinions 8 M/M Bore
|
Extra-hard high carbon brushless motor pinions are built to take all the power you
can deliver. Can be run on cars using an 8 m/m motor shaft. One 5x5 m/m set screw included. 2.5 m/m allen wrench (not included) fits the set screw.
|
| Part # |
Description |
Price |
| 8208 |
Extra Hard 8m/m bore 1.5 module Brushless Motor Pinion 8 Teeth |
$16.80 |
| 8209 |
Extra Hard 8m/m bore 1.5 module Brushless Motor Pinion 9 Teeth |
$16.80 |
| 8210 |
Extra Hard 8m/m bore 1.5 module Brushless Motor Pinion 10 Teeth |
$16.80 |
| 8211 |
Extra Hard 8m/m bore 1.5 module Brushless Motor Pinion 11 Teeth |
$16.80 |
| 8212 |
Extra Hard 8m/m bore 1.5 module Brushless Motor Pinion 12 Teeth |
$16.80 |
| 8213 |
Extra Hard 8m/m bore 1.5 module Brushless Motor Pinion 13 Teeth |
$16.80 |
| 8214 |
Extra Hard 8m/m bore 1.5 module Brushless Motor Pinion 14 Teeth |
$16.80 |
| 8215 |
Extra Hard 8m/m bore 1.5 module Brushless Motor Pinion 15 Teeth |
$16.80 |
| 8216 |
Extra Hard 8m/m bore 1.5 module Brushless Motor Pinion 16 Teeth |
$16.80 |
| 8217 |
Extra Hard 8m/m bore 1.5 module Brushless Motor Pinion 17 Teeth |
$16.80 |
| 8218 |
Extra Hard 8m/m bore 1.5 module Brushless Motor Pinion 18 Teeth |
$16.80 |
| 8219 |
Extra Hard 8m/m bore 1.5 module Brushless Motor Pinion 19 Teeth |
$16.80 |
| 8220 |
Extra Hard 8m/m bore 1.5 module Brushless Motor Pinion 20 Teeth |
$16.80 |
| 8221 |
Extra Hard 8m/m bore 1.5 module Brushless Motor Pinion 21 Teeth |
$16.80 |
| |
|
.8 Mod Brushless Motor Pinions (Fits 5 m/m and 1/8 inch motor shaft)
|
Extra hard high carbon brushless motor pinions are built to last with our hi-performance GEN3 steel slipper units. All pinions precision machined and stamped with the number of teeth. One 4 m/m set screw included. 2 m/m allen wrench (not included) fits the 4 m/m set screw. Can be run on cars using a 5 m/m motor shaft including Traxxas, Associated, and HPI models.
RRP#1200 5 m/m to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors.
Note: 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly larger outside diameter per tooth, roughly .00027 of an inch.
|
| Part # |
Description |
Price |
| 8711 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 11 Teeth |
$12.50 |
| 8712 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 12 Teeth |
$12.50 |
| 8713 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 13 Teeth |
$12.50 |
| 8714 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 14 Teeth |
$12.50 |
| 8715 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 15 Teeth |
$12.50 |
| 8716 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 16 Teeth |
$12.50 |
| 8717 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 17 Teeth |
$12.50 |
| 8718 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 18 Teeth |
$12.50 |
| 8719 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 19 Teeth |
$12.50 |
| 8720 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 20 Teeth |
$12.50 |
| 8721 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 21 Teeth |
$12.50 |
| 8722 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 22 Teeth |
$12.50 |
| 8723 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 23 Teeth |
$12.50 |
| 8724 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 24 Teeth |
$12.50 |
| 8725 |
Extra Hard 5m/m bore (.8 module) Brushless Motor Pinion 25 Teeth |
$12.50 |
| 1200 |
5m/m to 1/8 inch Reducer Sleeve. |
$3.95 |
| 1201 |
4x4 m/m set screws for 5 m/m pinions. 5 set screws. |
$2.50 |
| |
|
1 Mod Brushless Motor Pinions (Fits 5 m/m and 1/8 inch motor shaft)
|
Extra hard high carbon brushless motor pinions are built to last with our hi-performance GEN3 steel slipper units. All pinions precision machined and stamped with the number of teeth. One 4 m/m set screw included. 2 m/m allen wrench (not included) fits the 4 m/m set screw. Can be run on cars using a 5 m/m motor shaft including Traxxas, Associated, and HPI models.
RRP#1200 5 m/m to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors.
These pinions mate with most 1/8 scale nitro spur gears ( Associated, Losi, HPI, Ofna, Jammin, Kyosho )
|
| Part # |
Description |
Price |
| 1211 |
Extra Hard 5m/m bore (1.0 module) Brushless Motor Pinion 11 Teeth |
$12.50 |
| 1212 |
Extra Hard 5m/m bore (1.0 module) Brushless Motor Pinion 12 Teeth |
$12.50 |
| 1213 |
Extra Hard 5m/m bore (1.0 module) Brushless Motor Pinion 13 Teeth |
$12.50 |
| 1214 |
Extra Hard 5m/m bore (1.0 module) Brushless Motor Pinion 14 Teeth |
$12.50 |
| 1215 |
Extra Hard 5m/m bore (1.0 module) Brushless Motor Pinion 15 Teeth |
$12.50 |
| 1216 |
Extra Hard 5m/m bore (1.0 module) Brushless Motor Pinion 16 Teeth |
$12.50 |
| 1217 |
Extra Hard 5m/m bore (1.0 module) Brushless Motor Pinion 17 Teeth |
$12.50 |
| 1218 |
Extra Hard 5m/m bore (1.0 module) Brushless Motor Pinion 18 Teeth |
$12.50 |
| 1219 |
Extra Hard 5m/m bore (1.0 module) Brushless Motor Pinion 19 Teeth |
$12.50 |
| 1220 |
Extra Hard 5m/m bore (1.0 module) Brushless Motor Pinion 20 Teeth |
$12.50 |
| 1200 |
5m/m to 1/8 inch Reducer Sleeve. |
$3.95 |
| 1201 |
4x4 m/m set screws for 5 m/m pinions. 5 set screws. |
$2.50 |
|
Hard 48 Pitch Brushless Motor Pinions (Fits 5 m/m motor shaft)
|
All pinions precision machined and stamped with the number of teeth. One 4 m/m set screw included. 2 m/m allen wrench (not included) fits the 4 m/m set screw. Can be run on cars using a 5 m/m motor shaft including Traxxas, Associated, and HPI models.
|
| Part # |
Description |
Price |
| 2017 |
Hard 5 m/m Bore 48 Pitch Machined Pinion 17 Teeth |
$8.59 |
| 2019 |
Hard 5 m/m Bore 48 Pitch Machined Pinion 19 Teeth |
$8.59 |
| 2021 |
Hard 5 m/m Bore 48 Pitch Machined Pinion 21 Teeth |
$8.59 |
| 2023 |
Hard 5 m/m Bore 48 Pitch Machined Pinion 23 Teeth |
$8.59 |
| 2025 |
Hard 5 m/m Bore 48 Pitch Machined Pinion 25 Teeth |
$8.59 |
| 2027 |
Hard 5 m/m Bore 48 Pitch Machined Pinion 27 Teeth |
$8.59 |
| 2029 |
Hard 5 m/m Bore 48 Pitch Machined Pinion 29 Teeth |
$8.59 |
| 2031 |
Hard 5 m/m Bore 48 Pitch Machined Pinion 31 Teeth |
$8.59 |
| 2033 |
Hard 5 m/m Bore 48 Pitch Machined Pinion 33 Teeth |
$8.59 |
| 2035 |
Hard 5 m/m Bore 48 Pitch Machined Pinion 35 Teeth |
$8.59 |
| 2037 |
Hard 5 m/m Bore 48 Pitch Machined Pinion 37 Teeth |
$8.59 |
| 2039 |
Hard 5 m/m Bore 48 Pitch Machined Pinion 39 Teeth |
$8.59 |
| 2041 |
Hard 5 m/m Bore 48 Pitch Machined Pinion 41 Teeth |
$8.59 |
| 2043 |
Hard 5 m/m Bore 48 Pitch Machined Pinion 43 Teeth |
$8.59 |
| 2045 |
Hard 5 m/m Bore 48 Pitch Machined Pinion 45 Teeth |
$8.59 |
| |
|